For pressing seams and garments. Dressmaker's Ham- Wool and cotton covering. For molding and shaping darts, seams and collars when constructing a garment.

For pressing seams and garments. Seam Roll-Wool and cotton covering. For pressing long seams and narrow areas. The Seam Roll eliminates seam allowance ridge marks. 10.5"x 3.25"x 2.5"

The Seam Stick pressing rod is a great tool. Use it for pressing seams open, flat side can be used as a clapper and rounded top great for narrow seams. Hang it on the wall with the groove on the back.

This wooden block is usually used in tailoring. It gives a long lasting sharp crease!

The clapper can flatten bulky facing, a collar edge, pleats, even button holes! You can press even hard-to-reach spots with the narrow seams created by this point presser!

Use to press open seams for points & for straight or curved seams.

Pressing Mitt. Thick padding inside Pressing Mitt protects the hand from heat, even when using a high heat setting, allowing for spot pressing and molding curves in difficult to reach areas.

We're proud say we now offer the new Jiffy® Hand Mitt specifically designed to use with our products while steaming. As you know, steam is hot, so use this protective mitt when steaming. The extra-heavy mitt, which is made of the 100% cotton terry cloth, has insulating properties to prevent penetration of steam. The Jiffy® Hand Mitt allows you to steam your garments in seconds and stubborn wrinkles are easily removed!

Aids work at pressing machines and finished boards. Ideal for holding pleats, etc. while steaming.
Heavy foam padding with steam block so steam won't burn operators hands.
Band is reversible thus giving double service.

Innovative tool for steaming and pressing cuffs while retaining the all-important shape.

This Open-End Tie Former finishes stitched and open end ties. The heavy duty metal rods are covered with a soft, flexible nylon to protect ties from snags. Easy to use, simply slide into tie and steam for a perfectly finished look.

Press your velvets and velours with this quality Velvet Board. Simply place garment onto board, and press the backside of the fabric with iron for a plush finish. 13" X 5".

Dritz Press Clothes are designd for pressing when ever you need a little extra protection. For additional steam, dampen (Do Not Wet) press cloth, place over fabric and press with iron that has been set to temperature recommended for fabric. Sheer 22"x 30"- This 100% silk organza cloth is 22"x 30". It will protect fashion fabric from shine, scorch, press marks and water spots. It is sheer, lightweight and can be used with steam and high iron temperatures.

Let's you see as you press! Especially helpful for pressing darts, hems, tucks, pleats, buttonholes, etc. Superfine 100% cotton absorbs moisture evenly - prevents shine.

Heat of the iron releases chemicals that produce extra-sharp creases; lay it flat, and it takes them out! Chemicals will not hurt fabric. Just wash in cold water; can be used up to 1000 times. 14" x 24".

Absorbs ten times its weight in liquid. Choose the right degree of moisture for any garment. Remarkable viscose fabric easily wrings almost dry. Use again and again. 13 x 20

Protects fabric from shine, scorch, water spots and pressing marks. Reduces resin build-up on iron soleplate when applying iron-on interfacings, patches and appliques. Vue-thru fabric makes it possible to see garment position through press cloth.

The perfect pressing tool for applique projects Use to fuse lace an toher open-weave fabrics without sticking Withstands the highest heat setting on your iron Use without steam as a see-through press cloth generous size

No more fearful pressings or panicked moments! Keep even your most delicate clothing pristine with the Pressing Pad. This see-through pad, made of durable polyester, protects delicate fabrics from shine and scorching while still transferring wrinkle-releasing warmth.

When an ironing board is simply not an option, or you just have that one thing to press, whip out your ironing blanket! A heat and scorch resistant surface, this compact blanket allows you to safely iron almost anywhere: the bed, the dresser, or the floor!

Perfect for touch-ups and those sometimes-difficult sleeves, the Steel Top Board pops in moments to make any press job suddenly flawless; with its tapered head and slim design, no garment is too unwieldy.

Made of ½" plywood with a heavy cast aluminum frame that extends the entire length of the board. Standard board on one side, narrow on the other. Top is 24" x 4½" butt and 3" nose. Bottom is 24" x 4½" butt and 4" nose.

Replacement Covers and Pads for Sleeve Board No. SLBD

• Iron plate will fit standard irons
• Wire spring wraps around iron body to hold plate secure
• Iron all fabrics from the toughest of cottons to the most delicate silks

Stick On Fit Reflective Ironing Board Cover

The "Fit & Stick" cover is made from a space-age fabric that reflects the heat of your iron BACK to the garment effectively ironing both sides at once! Not only that, "Fit & Stick" actually sticks to your ironing board so it doesn't move around when you're ironing.

• Fits any size board and comes with its own foam pad.
• Easy to keep clean.
• Resistant to fusibles starches and interfacings.

For use with gravity feed irons, our Iron Resin cleans impurities and hard-water deposits in your water. Helps to keep your iron in good working condition, the Resin particles change color letting you know when changing is needed.

The ultra-clever Garbo hook lets you face garments so you can be looking straight at them. Makes pressing, steaming and inspecting a breeze. Made of aluminum, you'll wonder why nobody ever thought of this before. Length 5-7 1/16"

The easy way to clean your iron's surface! IRON CLEAN Your Secret Weapon for Removing: Fusibles, Facings, Sticky Residues ..... Just wipe your hot iron over the cleaning cloth with a paper towel or rag underneath

The more you wipe the more your remove

• Fast, easy, no unpleasant smell
• Each cloth is reusable several times
• You get 10 reusable cleaning clothes per package

Contains:

• 1 oz. tube cleaner
• 1 application cloth
• 1 finishing cloth

Ez-Off® removes starch, scorch, soil, and foreign residue from all hot metal ironing surfaces. Apply any amount needed to your hot head mitt using the convenient tube dispenser, and simply wipe clean. Non-flammable, safe for metals, fabric, and skin. 5-1/4 oz. per tube.

Removes clogging scale from steam and spray irons, vaporizers, and showerheads. Not for use with teflon sole plates. Contains sulfamic and hydroxyacetic acids. Also great for vaporizers sterilizers & shower heads.