Replacement bottle and cap for J-2 Jiffy® Steamers which use the check valve system. This part is used for J-2 steamers with serial numbers of T220281 and higher and J-2000 models with Serial Numbers of #139533 and higher.

Removes clogging scale from steam and spray irons, vaporizers, and showerheads. Not for use with teflon sole plates. Contains sulfamic and hydroxyacetic acids. Also great for vaporizers sterilizers & shower heads.

Replacement bottle and cap for J-2 Jiffy Steamers with Serial Numbers starting with "C" and Serial Numbers of T220280 and lower and J-2000 steamers with Serial Numbers of #139532 and lower.

Low profile, easy-to-handle water reservoir with a new "no spill" check valve cap for easy filling.

Tap water contains many minerals that will reduce the life span of your steamer. Heavy water may also leave marks on your garments. Use distilled water to protect your expensive steamer and your clothes.

Can be used in all Jiffy Steamer models. Removes hard water deposits from all internal parts. Easy to use.

Replacement Check Valve Cap for steamers using the check valve system.

Replacement cap for older J-2 steamers which use do not use the check valve system. This will include all J-2 steamers with Serial Numbers starting with "C" and Serial Numbers T220280 and lower and J-2000 steamers with Serial Numbers of #139532 and lower

This replacement cap covers the water fill hole in your J-3 / J-4000 Jiffy® Steamer Model.

The rod set conveniently holds both the steam head and the garment being steamed. This set includes a base adapter that connects to the base of the steamer.

The rod set conveniently holds both the steam head and the garment being steamed. This set includes a base adapter that connects to the base of the steamer.

Top of hose hanger rod set where hanger is attached for steaming.

Middle section of the rod set.

Can be used on Jiffy Steamer models that use a base adapter and thumbscrew connection.

Adds 18 inches to the current rod set height. This part must be used for 7.5 foot length hose.

Aluminum threaded stud for connecting rod set sections. Works with any Jiffy® Steamer rod set.

This part is used in older steamer models and secures the rod set to the housing unit.

Replacement screw for the Thumb Screw (item 0041)

Brass Hat Nozzle Attachment

Rod Set Nut

Replacement black casters.

7.5 Foot Drapery Hose Attachment with Plastic Steam Head.

Metal Head/Wood Handle 5.5 Foot Hose Attachment Complete

This attachment has a brush end to help clean away those tough spots.

Curved Pipe Hose Attachment

This part will enable you to accurately measure the water level in your Jiffy® Steamer.

Now you can take your Jiffy® Steamer everywhere you go with our ingeniously designed Jiffy® Steamer Travel Case. This case can be used with any model Jiffy® Steamer and is ideal for transporting your steamer to trade shows, work sites, trunk shows, conferences and conventions. Never be without your Jiffy® Steamer again! The Jiffy® Steamer Travel Case is constructed with the finest materials to insure the protection of your steamer. External Dimensions: 25" x 17" x 11"

18" x 15" x 8" grey vinyl case with black straps, zipper and velcro closure.

Esteam Travel Voltage Converter and Adaptor Plugs Take your ESTEAM worldwide and use it at full power. The Jiffy converter contains a 25amp triac semiconductor for stable power output, large aluminum heat-sink to dissipate heat and a UL listed, flame retarding, non-conductive material used in the housing. Each kit comes with 1600 watt converter and 4 adapter plugs. 1 for Continental Europe (two round prongs) 1 for North, Central and South America (two flat prongs - ungrounded) 1 for Australia and New Zealand (two flat, angled prongs - ungrounded) 1 for Great Britain and Hong Kong (fused BS1363 plug with two horizontal prongs and one vertical prong.